FEKA VS Grinder Pump 1000 MA

Feka VS Grinder Pump 1000 MA

Options:
Single Phase: Auto and Non Auto options
3 Phase: Non Auto option only

The pump is certified to the European Union standard EN 12050-1 which applies to lifting systems for waste water containing fecal material in buildings and construction sites. Thanks to the shredder, the pump is suitable for systems with small diameter pipes or those requiring high pressures.

Pump suitable for fixed installations with coupling device or mobile installation if placed directly on the bottom of the tank. Construction according to CEI 2-3 CEI 61-69 (EN 60335-2-41) standards. Single phase versions is available in automatic version with integrated float switch or in the manual version without float switch.

CONSTRUCTION FEATURES OF THE PUMP
The motor shaft is in AISI 316 stainless steel. Double mechanical seal with interposed oil chamber (non-toxic oil) in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side. Seal holder cover, motor case, cap and handle are made in stainless steel. The pump body and the base are in cast iron. The shredding system is in AISI 630 stainless steel. The handle is covered in insulating rubber
.
CONSTRUCTION FEATURES OF THE MOTOR
The motor is asynchronous, it is watertight, cooled by the pumped liquid. The rotor is mounted on greased-for-life ball bearings, oversized and selected to ensure low noise and durability. Standard thermo amperometric protection for the single-phase version with capacitor inserted as standard, the three-phase version has a thermal protection which can be connected to a control panel.

TECHNICAL DATA
Flow rate: from 0 m3h to 14,4 m3h
Head: 25 m
Pumped liquid: sewage water, gray water
Free passage: n/a
Liquid temperature: from 0°C to +40°C for domestic use
Outlet:1’’ 1/2 GAS - DN 32 and DN 40
Outlet direction: horizontal and vertical with curve kit accessory
Impeller: vortex in cast iron, there is a shredder
Motor protection degree: IP 68
Thermal classification of the motor insulation: F
Power cable type: H07RN8-F
Possible type of installation: fixed or mobile in vertical position
Maximum immersion depth: 7 meters